2018年10月5日 産業用大型X線CT装置導入に関する戦略 中間とりまめ ワークショップ(9/19更新)

2018.09.19

本専門委員会共催の(一財)機械システム振興協会の受託事業の標記WSの案内です。

JRIAホームページの案内

ドイツ・フラウンホーファー研究所のEZRTのXXL-CTを担当している、Michael Salamon氏に基調講演をしていただくことになりました。
是非、ご参加いただけますようお願いいたします。詳細は添付の案内を参照ください。

<記>

月日:平成30年10月5日 14:00-17:00 ワークショップ (17:15- 懇親会)

場所:中央大学 駿河台記念館 280室

主催:研究産業・産業技術振興協会

共催:機械システム振興協会

精密工学会 現物融合型エンジニアリング専門委員会

後援:経済産業省(調整中)

産業技術総合研究所 工学計測標準研究部門

日本自動車工業会、日本自動車部品工業会 等関連団体

プログラム

①14:00-14:10  主催者挨拶  研究産業・産業技術振興協会 専務理事 獅山有邦

②14:10-14:25  挨拶 「挨拶および最近の政策動向について」

経済産業省 産業技術環境局 研究開発課 課長 平井淳生

③14:25-14:55 講演 「X線CTで進化するデジタルエンジニアリング」

東京大学 大学院工学系研究科 精密工学専攻 教授 鈴木 宏正

④14:55-15:55  招待講演 Fraunhofer EZRT-XXL-CT, a new scale of Computed Tomography with stunning imaging capabilities

Michael Salamon, Fraunhofer IIS EZRT, Germany

⑤15:55-16:10 報告講演1 「大型X線CT装置のユーザー要求調査について」

研究産業・産業技術振興協会 特任研究員 高橋俊昭

⑥16:10-16:25 報告講演2 「大型ガントリーX線CTの基本設計について」

産業技術総合研究所 計量標準総合センター工学計測標準研究部門 部門長 高辻 利之

⑦16:25-16:40 報告講演3 「想定される運営体制について」

日本自動車研究所 理事 中野 節

⑧16:40-16:55 質疑応答

⑨16:55-17:00 閉会の辞

ワークショップ参加費:無料  懇親会参加費:5,000円

お申込みは、下記案内の参加申込書でお願いいたします。

大型X線CTワークショップご案内_0919

WS申込書_0829

 

Michael Salamon氏の講演

タイトル
Fraunhofer EZRT – XXL-CT, a new scale of Computed Tomography with stunning imaging capabilities

概要
Computed tomography (CT) based on conventional X-ray tubes has become a standard tool in the field of non-destructive testing (NDT), at least for relatively small parts. Nevertheless, the increasing demand for digitization of larger volume parts or specimen with high density materials requires the use of high energy X-ray sources in the MeV regime, e.g. linear accelerators, to cope with the requirement of higher penetration capabilities. At a first glance, considering the limits in standard CT applications, where the reconstruction of multi-material objects is strongly affected by artifacts the application of just higher energies seems not sufficient to scan vast objects consisting of a huge variety of materials. But due to the material specific absorption behavior at high X-ray energies it is, allowing to simultaneously detect low density and high density materials with a minimum of artifacts interfering. Thanks to this fact a CT of vast sized objects like i.e. full cars or even loaded sea-freight containers is possible using an appropriate CT systems. At the Fraunhofer Development Center for X-ray Technology in Fuerth, Germany this kind of CT system has been initially developed and brought into operation accessing the technology to a large range of users. In this contribution an overview about the Fraunhofer EZRT, XXL-CT is given describing the physical effects at high X-ray energies, leading to stunning imaging capabilities for large objects with a large material-mix like i.e. full cars.